Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Nashville?
A chimney cap in Nashville typically costs $125 to $450 installed, and crown repair or rebuild typically runs $300 to $1,200 depending on whether we’re patching cracks or pouring a new crown. A full cap-and-crown job, where both need attention at once, usually lands between $400 and $1,500. Those ranges cover materials and labor from a chimney specialist, not a generalist who happens to own a ladder.
Here’s the short version of why this matters: a cracked crown lets water into the masonry, and one Nashville freeze can turn a hairline crack into a rebuild. A missing or rusted cap lets rain, birds, and sparks where they don’t belong. We treat both as fire-safety and water-damage work, not cosmetic upgrades, and we quote them in writing before anything is ordered.
Key Takeaways
- Chimney cap installation in Nashville: $125 – $450, depending on cap style and flue count.
- Crown repair (crack sealing and resurfacing): $300 – $700.
- Full crown rebuild: $600 – $1,200, more for large or multi-flue crowns.
- Water is the biggest driver of cost. Nashville’s freeze-thaw winters punish small cracks fast.
- Our technicians have up to 9 years of experience, and we install caps and crowns from Gelco, Olympia Chimney, Famco, and Copperfield.
- Estimates are free. Call (844) 405-8628. We answer 24/7.
Chimney Cap & Crown Cost Breakdown (2026)
The table below gives typical installed ranges for Nashville. Material choice and the condition of the crown underneath move the number, so treat these as planning figures. Your written estimate sets the final price.
| Line item | Typical installed range (Nashville) | Notes |
|---|---|---|
| Single-flue stainless cap | $125 – $275 | Standard protection for one flue opening |
| Multi-flue cap (two or more flues) | $250 – $450 | Larger footprint, more anchoring |
| Custom or decorative cap | $400 – $850 | Copper and specialty designs run higher |
| Cap with animal guard / spark screen | $150 – $350 | Adds mesh and screening to the base cap |
| Crown crack repair and sealing | $300 – $700 | Best when the crown is structurally sound |
| Full crown rebuild (poured or cast) | $600 – $1,200 | Removes failed mortar and forms a new overhang |
| Crown rebuild on large or multi-flue chimney | $900 – $1,600 | More surface area, more material |
| Crown wash / resurfacing (HeatShield on flue as needed) | $250 – $550 + flue work | Cosmetic-plus-protective coating, quoted with crown repair |
What pushes the price up: a crown that’s failed all the way through to the mortar bed, a chimney with more than one flue, an especially tall or steep roof that takes more setup, a cap in copper or a custom footprint, and any animal nesting or debris removal that has to happen before the cap goes on. What pulls it down: catching a crown when it’s only lightly cracked, choosing a standard stainless cap over custom metal, and combining the cap and crown in one visit so we’re not setting up twice. If the flue itself is also compromised, that’s a separate line item, and we’ll walk you through Nashville chimney cleaning and inspection first so the estimate reflects everything at once.
What Affects Chimney Cap & Crown Pricing in Nashville
Nashville is a wet, freeze-thaw climate. That one fact drives most of the cost variation you’ll see.
- Freeze-thaw damage. Nashville winters swing above and below freezing repeatedly. Water that seeps into a crown crack expands overnight and widens the crack, so a small repair this fall can turn into a rebuild by spring. Repairing early is usually the cheaper path.
- Older masonry in established neighborhoods. Homes in areas like Green Hills, East Nashville, and 12South often have original brick chimneys with crowns poured decades ago. Those crowns tend to be a simple flat mortar wash rather than a sloped overhang, which sheds water poorly and fails faster. A rebuild to a proper sloped crown costs more up front but lasts.
- Roof pitch and chimney height. Steep roofs and tall chimneys need more staging and safety setup. That’s a labor cost, not a material cost, and it’s real.
- Number of flues. A fireplace flue plus a furnace or water heater flue means a larger cap and a larger crown. Two-flue and three-flue chimneys price accordingly.
- Material choice. Standard stainless is the value pick. Copper and custom caps look great and hold up, but you’ll pay for them.
- What the cap is covering. If the flue is missing a cap and has pulled in rain, birds, or a nest, we may need to sweep and inspect before installing. That’s added scope, quoted plainly, not tacked on quietly.
Why a Cap and a Sound Crown Actually Matter
A chimney does two jobs: it carries smoke and carbon monoxide up and out, and it keeps water out of your masonry. A cap handles the first, and a crown handles the second.
A proper cap with a screen does three things. It keeps rain from pouring straight down the flue, it stops birds and squirrels from nesting inside, and it catches sparks so they don’t land on your roof or the neighbor’s. A missing cap is one of the most common things we find on older Nashville chimneys, and it’s also one of the cheapest problems to fix before it gets expensive.
The crown is the concrete or mortar cap at the very top of the chimney. It’s supposed to slope away from the flue and overhang the brick slightly so water runs off the sides and never into the masonry. When the crown cracks or crumbles, water goes straight into the brick and mortar, and in a Nashville winter that water freezes overnight, expands, and spalls the brick face. Repairing a crown is far cheaper than rebuilding a chimney, and it protects the whole structure under it.
If the flue lining is also deteriorating, our Nashville chimney cleaning service starts with an inspection, and we can apply HeatShield ceramic resurfacing to restore the flue’s integrity without a full liner replacement. For flues that are too far gone, we install DuraFlex flexible liner systems. Both options come from the same trade-grade material list that CSIA-certified professionals work with, and we keep the repair and the cap on the same visit whenever the job allows. That’s the advantage of working with a full-service chimney specialist rather than a generalist handyman.
How to Save on Chimney Cap & Crown Work in Nashville
- Bundle the cap and crown in one visit. Combining the two means one setup, one trip up the roof, and one line of inspection that covers both. That’s usually the single biggest saving on a cap-and-crown job.
- Repair the crown early. Sealing a hairline crack costs a fraction of a full rebuild. In a freeze-thaw climate, waiting a season is the expensive choice.
- Choose a standard stainless cap first. A good stainless cap protects the flue just as well as custom copper for most homes. Spend on copper only if you want the look.
- Get the flue inspected while we’re up there. If a cap or crown job surfaces a flue problem, a HeatShield resurfacing can be far cheaper than waiting for a full reline. One inspection, one plan, one estimate.
- Book the estimate before fall. Free estimates mean no cost to find out what you’re dealing with. Call (844) 405-8628 and we’ll get a written range to you.
How the Cap and Crown Get Installed
For a cap, we measure the flue opening, select a cap that fits the flue count and style, secure the anchoring, and screen the openings. A standard install is quick. A custom cap or an unusually tall chimney takes longer.
For a crown, the work starts with removing the failed mortar or concrete and clearing the top of the chimney. If we’re rebuilding, we form a new sloped crown that overhangs the brick so water sheds away from the masonry, then cure and seal it. If the crown is sound enough to repair, we clean it out and apply a repair-grade resurfacing product. A chimney in good condition can handle both in one visit.
Safety note: chimney crown work happens on the roof, sometimes on a steep pitch. It’s not a do-it-yourself job. Falls are the real risk up there, and a poorly formed crown that doesn’t shed water just fails again next winter. We’d rather do it once, correctly. This is why we recommend a trained professional for anything at the top of the chimney.
When to Repair vs. Replace a Crown
If the crown has a few surface cracks but the mortar under it is solid, a repair is usually the right call. If the crown has separated from the brick, has deep cracks through its full thickness, or is crumbling across the top, a rebuild is the better spend. A crown with no overhang is worth rebuilding to a proper sloped shape even if it’s not actively failing, because a flat wash will always shed water poorly in a Nashville freeze-thaw cycle. We’ll tell you honestly which side of that line your chimney is on, and the written estimate reflects it.
FAQs – Chimney Cap & Crown Cost in Nashville
How much does a chimney cap cost in Nashville?
A chimney cap in Nashville typically costs $125 to $450 installed, with a standard single-flue stainless cap at the low end and custom or copper caps at the high end. Multi-flue chimneys run more because there’s more to cover and anchor. Call (844) 405-8628 for an exact quote. Estimates are free.
How much does chimney crown repair cost in Nashville?
Chimney crown repair in Nashville typically costs $300 to $700 when the crown is still sound enough to seal, and a full crown rebuild typically runs $600 to $1,200, or $900 to $1,600 for large or multi-flue chimneys. Repair is the cheaper option when the mortar bed underneath is holding. Call (844) 405-8628 for a written range.
Is it cheaper to repair a chimney crown or rebuild it?
Repair is almost always cheaper up front than a rebuild, but only when the crown is structurally sound. If the crown has separated from the brick or cracked through its full thickness, a repair won’t last a Nashville winter, and the rebuild is the better value. We’ll tell you which one your chimney needs, and the free estimate will show both if it’s a close call. Call (844) 405-8628.
Can you install a chimney cap and repair the crown on the same visit?
Yes, in most cases. A standard cap install and crown repair or rebuild can be handled in one visit, and combining them is the cheapest way to get both done. The chimney has to be inspected first to confirm the crown and flue condition. Call (844) 405-8628 and we’ll set up the estimate.
How much does a custom or copper chimney cap cost in Nashville?
A custom or copper chimney cap in Nashville typically costs $400 to $850 installed, depending on footprint, flue count, and finish. A standard stainless cap protects the flue just as well for most homes and costs $125 to $450, so copper is mostly a look decision. Call (844) 405-8628 to talk through the options.
What causes chimney crown damage in Nashville?
Freeze-thaw cycles are the main cause. Nashville winters repeatedly freeze and thaw, and water that seeps into a small crown crack expands overnight and widens it. A flat crown with no overhang sheds water poorly, which is why so many older Nashville chimneys have crowns that need attention. Call (844) 405-8628 to find out what yours needs.
Get a Free Cap and Crown Estimate in Nashville
A cap and a sound crown are the two cheapest ways to protect a chimney from water damage and keep sparks and animals out of the flue. If your cap is missing, rusted, or loose, or your crown is cracked, now is the time to look at it, before another freeze-thaw season turns a repair into a rebuild. Our technicians have up to 9 years of experience, and we handle caps and crowns from Gelco, Olympia Chimney, Famco, and Copperfield alongside full flue relining and HeatShield resurfacing when your chimney needs more than a top-end repair.
We serve homeowners across Nashville and beyond, and we quote every job in writing, with a free estimate, before anything is ordered. Call (844) 405-8628. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
Pricing reflects the Nashville market as of 2026. Nashville Chimney Cleaning offers free estimates. Call (844) 405-8628.
Written by the team at Nashville Chimney Cleaning.
What Our Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Rosa Morales"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Bethany Meyer"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Shannon Fletcher