Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Nashville?
Chimney liner replacement in Nashville typically costs $2,400 to $5,800, and a partial chimney rebuild usually runs $3,200 to $9,500 depending on how much masonry needs to come down. A HeatShield ceramic resurfacing, which restores a cracked flue without pulling the old liner, generally lands between $1,100 and $2,300. Those ranges cover the structural work, the liner and the hardware; the written estimate you get after an inspection sets the final price.
The spread is wide because two Nashville chimneys of the same height can need very different work. An older home near Richland Creek may have a clay tile flue that’s cracked and unlined above the smoke chamber, while a 1990s build in Antioch might have a correctly sized flue that only needs a relining after a wood stove insert went in. We look at the flue, the firebox, the crown and the exterior masonry together before quoting anything.
Key Takeaways
- Full liner replacement in Nashville: $2,400 to $5,800 for most single-flue homes.
- HeatShield ceramic resurfacing: $1,100 to $2,300 when the flue is still structurally sound.
- Partial rebuild (crown, top courses, or the smoke chamber area): $3,200 to $9,500.
- Rebuilds run higher than relining because masonry work involves removing and replacing brick, mortar and often the crown.
- Our technicians have up to 9 years of experience, and estimates are free. Call (844) 405-8628. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the line items shake out for a typical Nashville home in 2026. These are estimates for planning, not quotes. The written estimate after an inspection is what you actually pay.
| Work item | Typical Nashville range (2026) | What it covers |
|---|---|---|
| Inspection and flue assessment | Free with estimate | Video scan of the flue, firebox check, crown and cap condition |
| HeatShield ceramic resurfacing | $1,100 – $2,300 | Restoring a sound but cracked or pitted flue without full replacement |
| DuraFlex flexible liner, single-flue install | $2,400 – $4,800 | New stainless liner, top plate, cap and insulation wrap |
| DuraFlex liner, tall or two-story flue | $3,400 – $5,800 | Longer run, more insulation, harder roof access |
| Liner plus new firebox or damper work | $3,800 – $6,500 | Relining combined with firebox repair or damper replacement |
| Crown repair and top-course rebuild | $3,200 – $5,400 | Replacing a failed crown and the top few courses of brick |
| Partial rebuild to the smoke chamber | $5,500 – $9,500 | Rebuilding the upper stack when spalling brick runs deeper |
| Full rebuild above the roofline | $8,000 and up | Complete stack replacement from the roof line up, plus liner |
What pushes a job toward the top of a range: a flue that’s been used for years with a wood stove insert and needs a correctly sized liner rather than the old undersized one, a crown that’s cracked through and letting water into the masonry, or a chimney on a steep Nashville roofline that needs scaffolding instead of a ladder. What pulls it down: a flue still in good enough shape for HeatShield resurfacing, a liner that only needs replacing because of a sizing issue, or several small items handled in one visit. We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield, so the material choice follows the flue rather than the other way around.
What Affects Chimney Liner & Rebuild Pricing in Nashville
Nashville’s climate does specific things to chimneys. Our summers run hot and humid, winters swing between mild days and hard overnight freezes, and the freeze-thaw cycle is the main reason we see spalling brick and cracked crowns across Middle Tennessee. A chimney that shed a few brick faces last spring will often be worse by the next one.
- Flue condition and liner type. A flue that’s sound but cracked can often be resurfaced with HeatShield ceramic, which costs less than a full DuraFlex install. A flue with broken clay tiles or gaps at the joints needs a full liner.
- Chimney height and roof access. A two-story stack or one set back on a steep roof takes longer and needs more safety setup. In older neighborhood housing around East Nashville and Germantown, the chimney often sits on a small footprint that’s awkward to work from, which adds labor.
- What the chimney serves. A gas insert, wood stove or gas dryer appliance changes the liner spec. A wood stove often needs an insulated liner sized to the appliance; a gas appliance needs a liner rated for the exhaust. Getting this wrong is a carbon monoxide risk, not just a code issue.
- Extent of masonry damage. A failed crown or the top few courses is a partial rebuild. Once water has been getting into the stack for years, the damage usually runs deeper and the price climbs toward the upper end.
- Flue size and number of flues. A single flue is the standard case. A house with two flues serves two fireplaces or a fireplace plus a furnace, and each one is priced on its own.
- Plan on the liner aging out. A clay tile flue that’s original to an older Nashville home has often already outlived its useful life. If the flue is unlined or the tiles are cracked, the liner is a safety item, not an upgrade.
One more factor that surprises people: creosote. A flue that’s had a wood fire burning for years can build up glazed creosote that’s hard to remove and is a real fire hazard. A sweep is the first step before any relining, and that sweep tells us whether the flue is a candidate for HeatShield or needs the full DuraFlex treatment. You can read more about that on our Nashville Chimney Cleaning page, and if you’re comparing services across the area, our Nashville page explains how we approach the work here.
How to Save on Chimney Liner & Rebuild in Nashville
The biggest lever is timing. Get an inspection before the fall burn season, when a small crown crack can still be patched rather than rebuilt. Catching a flue in HeatShield territory saves you the cost of a full DuraFlex install, and that’s a difference of $1,300 or more in most cases. A few other things that help:
- Ask whether resurfacing is an option. If the flue is structurally sound but cracked or pitted, HeatShield ceramic resurfacing restores it without a full tear-out. Not every flue qualifies, but the ones that do save real money. We’ll tell you straight if it applies.
- Fix the crown before the masonry. A crown that’s cracked lets water in, and water is what drives spalling brick. A crown repair now is a fraction of what a partial rebuild costs later.
- Bundle the sweep with the inspection. A sweep and flue assessment in one visit costs less than booking them separately, and it gives you a clear picture before you commit to a liner.
- Get the estimate in writing before work starts. The written estimate is what sets the final price. Our estimates are free, so there’s no cost to finding out what your chimney actually needs.
- Keep water out of the flue. A cap and a properly fitted top plate keep rain and animals out, and they’re part of every DuraFlex install we do. If your cap is missing or rusted through, that’s a cheap fix that protects an expensive one.
We keep chimney repair in-house, not subcontracted, so the person who inspects your flue is the same one who relines or rebuilds it. No follow-up visit with another crew. If you want a straight answer on whether your Nashville chimney needs a liner or a rebuild, call (844) 405-8628. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Nashville?
A single-flue DuraFlex liner install in Nashville typically costs $2,400 to $5,800, depending on chimney height, roof access and whether insulation wrap is needed. A HeatShield ceramic resurfacing, which avoids a full liner in some cases, runs $1,100 to $2,300. Call (844) 405-8628 for an exact quote. Estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repair is cheaper when the flue is still structurally sound: HeatShield resurfacing at $1,100 to $2,300 costs less than a full DuraFlex replacement at $2,400 to $5,800. Replacement is the better call when the clay tiles are broken or the flue is unlined, because a patch won’t fix a structural gap. An inspection tells you which applies to your chimney.
How much does a chimney rebuild cost in Nashville?
A partial rebuild, such as the crown and top courses, typically runs $3,200 to $5,400. A rebuild that runs further down the stack, toward the smoke chamber, usually lands between $5,500 and $9,500. The depth of water damage is the main factor. Call and we’ll come out and tell you what’s actually failing.
Can you come today?
Same-day service is often possible. Our technicians have up to 9 years of experience, and we dispatch from 7am to 7pm, Sunday through Friday. Call (844) 405-8628. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed Saturday.
Why does my Nashville chimney need a rebuild instead of just a liner?
Because a liner protects the inside of the flue and a rebuild repairs the masonry outside it. Nashville’s freeze-thaw winters crack crowns and spall brick, and once water has been working into the stack for a few seasons, the brick itself fails. Lining it without fixing the masonry just puts a new flue inside a wall that’s coming apart.
Pricing reflects the Nashville market as of 2026. Nashville Chimney Cleaning offers free estimates – call (844) 405-8628.
A few things worth knowing before you book
Chimney work is one of the few home repairs where the wrong call is a fire or carbon monoxide risk. A flue that’s undersized for a wood stove, a liner installed without the right cap, a firebox with gaps in the mortar: any of these can turn a working fireplace into a problem. The reason we carry six professional-grade brands (DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, Copperfield) is that the right material changes with the flue, and we don’t want a job spec’d around what happens to be on the shelf.
We also want to be clear about what we do and don’t cover. Our service lines are chimney sweeping, dryer vent cleaning and chimney repair. Dryer vent cleaning sits alongside chimney work here because a lint-clogged vent is the second leading cause of residential house fires, and it’s a venting problem the same way a dirty flue is. If your dryer is taking two cycles to dry a load, that’s a fire-safety signal, not a laundry issue.
On repair, we do the structural work in-house. That means the person who diagnoses a cracked smoke chamber or a failed crown is equipped to fix it without a subcontractor coming out. One visit, one set of eyes on the whole chimney, and a written estimate that spells out what’s being fixed and why. If your flue is a candidate for HeatShield ceramic resurfacing, we’ll say so. If it needs a full DuraFlex liner, we’ll say that too, and explain what happens if you wait.
Call (844) 405-8628 to book a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Written by the team at Nashville Chimney Cleaning.
What Our Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Karen Yang"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Rosa Morales"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Bethany Meyer