Gas fireplace service
Sweep & inspection
Caps & crowns
Flue relining
Masonry repairLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fireplace Services Cost in Nashville?
Fireplace services in Nashville typically run $179 to $299 for a standard chimney sweep, $325 to $700 for a dryer vent cleaning and reroute, and $1,800 to $4,500 for a full flue relining with a DuraFlex flexible liner system. HeatShield ceramic resurfacing, which restores flue integrity without a full liner replacement, usually lands between $650 and $1,400. Those ranges cover the three core services we handle: chimney sweeping, dryer vent cleaning, and chimney repair.
What you actually pay depends on the condition of your flue, how much creosote has built up, and whether the job needs structural work. A written estimate sets the final price, and estimates are free. Call (844) 405-8628. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Services Cost Breakdown (2026)
Here’s how the numbers stack up across a typical Nashville fireplace and venting job. These are estimated ranges, not quotes. Your written estimate reflects what we find when we inspect the flue.
| Service | Typical Range | What It Covers |
|---|---|---|
| Chimney sweep (standard) | $179 – $299 | Removing soot and creosote from the firebox, flue, and smoke chamber; a visual safety check |
| Heavy creosote removal (Stage 3) | $400 – $900 | Glazed, hardened creosote that requires more aggressive mechanical removal before the flue is safe |
| Dryer vent cleaning | $149 – $249 | Clearing lint buildup from the full vent run; checking the transition duct and exterior termination |
| Dryer vent reroute or replacement | $325 – $700 | Replacing crushed or sagging flex duct with proper rigid or semi-rigid Famco components |
| HeatShield ceramic resurfacing | $650 – $1,400 | Repair-grade restoration of cracked or pitted flue tiles without a full liner replacement |
| DuraFlex flexible liner install | $1,800 – $4,500 | Full relining for deteriorated, incorrectly sized, or unlined flues including new installs |
| Chimney cap and crown work | $250 – $850 | Gelco, Olympia Chimney, Famco, and Copperfield caps, covers, and venting hardware |
| Masonry or structural repair | $500 – $3,500+ | Tuckpointing, crown repair, flashing, and firebox rebuilding assessed on-site |
What pushes a job toward the top of a range? Flue size and height matter. A tall, oversized flue takes more liner material and more time. So does a flue that’s never been cleaned. Years of layered creosote have to come out before anything else happens, and that’s often where the bigger number comes from. A missing cap that let water and debris in adds repair work you didn’t plan for. A dryer vent that’s been crushed behind the appliance or routed through three elbows costs more to fix than a straight, accessible run.
What keeps a job at the low end? Regular sweeping, an accessible cap, and a flue that’s sized correctly for the fireplace. Catching a cracked tile early often means HeatShield ceramic resurfacing instead of a $3,000-plus reline. That difference is the single biggest cost swing in fireplace work, and it’s worth asking about specifically.
What Affects Fireplace Services Pricing in Nashville
Nashville has a mix of older brick masonry chimneys, mid-century ranches, and newer builds with factory-built fireplaces and gas inserts. Each one prices out differently. Here are the factors that move the number most.
- Chimney type and condition. A masonry chimney with intact flue tiles is a straightforward sweep. A chimney with spalling brick, a crumbling crown, or cracked tiles turns into a repair job. We assess this on the same visit rather than handing you off to another crew, because chimney repair is in-house work for us.
- Creosote stage. Stage 1 creosote brushes out easily. Stage 3 is glazed and hardened, and it takes mechanical removal plus a longer visit. Creosote is the fuel for most chimney fires, so this isn’t a line item to skip. If your fireplace sees heavy use through a Nashville winter, plan on a sweep before the season starts, not after.
- Liner condition and sizing. A flue that’s unlined, cracked, or undersized for the appliance needs relining. DuraFlex flexible liner systems handle new installs and replacements for deteriorated or incorrectly sized flues. An incorrectly sized flue is a common find in older homes where a wood stove or insert was added without matching the flue to the appliance.
- Access and roofline. A steep roof, a chimney tucked behind a lower addition, or a tight crawlspace under a fireplace all add labor. So does a long vent run behind a dryer pushed into a tight closet.
- Material choice. We work with six recognized professional-grade brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. These are the same materials specified by CSIA-certified professionals across the industry. Cheaper generic components exist, but they’re not what we install, and the price difference usually reflects real differences in what holds up.
- Whether the work is safety-critical. A dryer vent packed with lint is a fire risk, not a housekeeping annoyance. Lint buildup is a leading cause of residential house fires, and dryer vent cleaning is a core service for us, not an add-on. When a vent is genuinely blocked, the job is priced as the safety work it is.
One thing that doesn’t change the price: whether you call on a Sunday or a Wednesday. The price is set per job by the written estimate, full stop.
How Much Does a Chimney Sweep Cost in Nashville?
A standard chimney sweep in Nashville typically costs $179 to $299. That covers the firebox, flue, and smoke chamber, plus a visual check of the cap, crown, and flashing. What does a sweep actually remove? Soot, ash, and creosote, the tar-like residue that condenses on flue walls as smoke cools. Left alone, creosote builds in layers and becomes the fuel a chimney fire needs.
A sweep isn’t just cleaning. It’s the inspection that tells you whether the flue is sound. Most of the repair work we do starts with a sweep that revealed a cracked tile, a failed crown, or a cap that’s been missing for years. Catching it at that stage usually means a smaller repair bill than catching it after water damage has spread into the masonry.
If your fireplace has gone several seasons without a sweep, expect the higher end of the range. Heavier buildup takes longer to clear safely, and the technician may recommend a follow-up assessment before the flue is cleared for use. Call (844) 405-8628 for a free estimate.
How Much Does Dryer Vent Cleaning Cost in Nashville?
Dryer vent cleaning in Nashville typically costs $149 to $249. A reroute or duct replacement, where the existing vent is crushed, sagging, or routed with too many elbows, runs $325 to $700. We treat this as fire-safety work, because that’s what it is. Lint is highly combustible, and a clogged vent traps heat in the dryer and the duct run. That’s why dryer vent cleaning sits alongside chimney sweeping as a core service here rather than a tack-on.
Our familiarity with Famco venting systems carries straight into this work. The same principles that govern a chimney flue apply to a dryer duct: correct sizing, smooth interior walls, short runs, and a termination that actually exhausts outside. Crushed accordion-style flex duct behind the dryer is one of the most common problems we find. It traps lint at the ridges and restricts airflow, and replacing it with proper rigid or semi-rigid components often solves a dryer that’s been taking two cycles to dry a load.
A blocked vent is also a carbon monoxide concern with gas dryers. If your dryer shares space with a gas appliance or the vent terminates anywhere but outdoors, that’s worth a look sooner rather than later.
How Much Does Chimney Repair Cost in Nashville?
Chimney repair in Nashville ranges from about $500 for minor crown and flashing work up to $3,500 or more for structural masonry repair. Two repair methods we use sit in between, and the choice between them is often the most useful conversation a homeowner can have with us.
HeatShield Ceramic Resurfacing: $650 – $1,400
HeatShield is a repair-grade ceramic resurfacing product used by top-tier chimney professionals. It restores flue integrity by resurfacing the inside of the flue, sealing cracks and pitting without pulling the original tiles or installing a full liner. For a flue with moderate deterioration, it’s the cost-effective structural option that a lot of generalist cleaners won’t even bring up, because it takes product knowledge and the right application process to do it well.
DuraFlex Flexible Liner: $1,800 – $4,500
When a flue is too far gone for resurfacing, or it was never lined properly to begin with, a full reline is the answer. DuraFlex flexible liner systems cover both new installs and replacements, and the flexible construction lets us line a flue that has offsets or curves without tearing into the masonry. Relining is also the fix when an insert or wood stove was installed into a flue sized for an open fireplace. Appliance-to-flue sizing matters for draft and safety, and it’s a detail we check on every repair assessment.
Both of these are in-house services. We diagnose the problem and fix it without subcontracting to another crew, which keeps the estimate honest and the timeline short. If you’re weighing repair against replacement of the whole chimney structure, get the assessment first. A full rebuild is a major expense, and in many cases HeatShield or a DuraFlex liner resolves the safety issue for a fraction of that cost.
How Much Do Chimney Caps and Venting Hardware Cost in Nashville?
Caps, covers, and venting hardware typically run $250 to $850 installed, depending on the size of the flue and the type of cap. A missing or damaged cap is one of the most expensive small problems on a chimney, because it lets rain, snow, and animals straight into the flue. Water is the main destroyer of masonry chimneys, and once it’s inside, you’re looking at crown repair, tile replacement, or worse.
We stock and install components from Gelco, Olympia Chimney, Famco, and Copperfield for caps, covers, and venting hardware. Matching the cap to the flue and the appliance matters. A cap sized for an open fireplace won’t vent a wood stove insert correctly, and a poorly fitted cap can restrict draft. If your cap is loose, rusted through, or missing, that’s a small repair that protects a much larger investment.
How to Save on Fireplace Services
The biggest way to save on fireplace services in Nashville is to catch problems early. A sweep and inspection that reveals a hairline crack can be fixed with HeatShield for a few hundred dollars. The same crack, left for two more seasons of water intrusion, can mean a reline or masonry repair. Here’s what actually moves the number down:
- Schedule a sweep before the heating season. Buildup is easier to clear before it hardens into glazed creosote. It also gives you time to plan a repair rather than react to one. A typical Nashville fireplace that sees regular winter use benefits from an annual sweep.
- Keep the cap on. A properly fitted cap from Olympia Chimney or Copperfield keeps water, birds, and debris out of the flue. The cap is the cheapest insurance on the whole system. If yours is missing, replacing it now beats paying for water damage later.
- Don’t skip the dryer vent. A $149 to $249 cleaning prevents a fire risk and often restores dryer efficiency, which shows up on your energy bill. It’s the least expensive safety service we offer.
- Ask about HeatShield before agreeing to a reline. If a flue has moderate deterioration, ceramic resurfacing can resolve it for hundreds rather than thousands. Ask directly whether resurfacing is an option for your flue. If a contractor doesn’t mention it, that’s a question worth asking.
- Fix sizing problems when you find them. An undersized flue causes poor draft and more creosote. Correcting it with a properly sized DuraFlex liner costs less than the ongoing buildup and safety problems of leaving it.
- Get the estimate in writing. Our estimates are free and the price is set per job by the written estimate. No surprises on the invoice.
Call (844) 405-8628 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Material Choice Matters for the Price
Fireplace and venting work isn’t the place to save on parts. We work with six recognized professional-grade brands: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. These are the materials specified by CSIA-certified professionals across the industry, and the difference shows up in how long a repair lasts. A cheap liner that fails in a few years costs more in the long run than a DuraFlex system installed once. A generic cap that rusts through lets water in. HeatShield resurfacing only works if the product and the application are both right.
That’s the practical reason we’ve built our service around these brands rather than the cheapest thing on a shelf. It’s also why a quote that’s dramatically lower than everything else is worth questioning. Ask what materials go into the job. The answer tells you a lot.
What Does the Estimate Process Look Like?
You call, we book a visit, and a technician inspects the fireplace, flue, cap, and dryer vent if you want that checked too. The inspection covers the parts you can’t see from the hearth: the flue interior, the smoke chamber, the crown, and the flashing. From there we explain what we found, present the options in plain language, and give you a written estimate with the price per job. If a repair is straightforward, we can often handle it on the same visit. If it needs a liner or resurfacing, we schedule it.
No pressure and no upsell. If your flue is in good shape, we’ll tell you that and sweep it. If it needs work, you’ll know exactly what the options cost and what each one fixes.
FAQs – Fireplace Services Cost
How much does a chimney sweep cost in Nashville?
A standard chimney sweep in Nashville costs $179 to $299. Heavier creosote removal runs $400 to $900. The written estimate sets the final price. Call (844) 405-8628 for an exact quote; estimates are free.
How much does fireplace repair cost in Nashville?
Fireplace and chimney repair in Nashville ranges from about $500 for minor crown and flashing work to $3,500 or more for structural masonry. HeatShield ceramic resurfacing runs $650 to $1,400, and a DuraFlex liner install runs $1,800 to $4,500. Call (844) 405-8628 for an exact quote; estimates are free.
Is it cheaper to repair or replace a chimney flue?
Repair is almost always cheaper when the damage is moderate. HeatShield ceramic resurfacing at $650 to $1,400 resolves cracked or pitted flue tiles without a full liner replacement, which typically runs $1,800 to $4,500. A full reline or rebuild is only necessary when the flue is unlined, badly deteriorated, or incorrectly sized for the appliance. Call (844) 405-8628 for an assessment; estimates are free.
How much does dryer vent cleaning cost in Nashville?
Dryer vent cleaning in Nashville costs $149 to $249. A reroute or duct replacement for crushed or poorly routed venting runs $325 to $700. Blocked dryer vents are a fire risk, so it’s worth scheduling before the lint packs down further. Call (844) 405-8628 for an exact quote; estimates are free.
Can you come today?
Often, yes. Same-day service depends on the day’s schedule, and the price is set per job by the written estimate either way. Call (844) 405-8628. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Does a chimney cap cost extra?
Yes, a cap is priced separately from a sweep, typically $250 to $850 installed depending on size and style. We install caps and venting hardware from Gelco, Olympia Chimney, Famco, and Copperfield. Call (844) 405-8628 for an exact quote; estimates are free.
Book a Free Estimate in Nashville
If your fireplace has gone a season or two without attention, or your dryer is taking longer to dry a load, a free estimate is the fastest way to know where you stand. We’ll inspect the flue, explain what we find, and give you a written price before any work begins. For more on routine maintenance, see our Nashville Chimney Cleaning page, and to learn more about the area we serve, visit Nashville.
Our technicians have up to 9 years of experience across chimney sweeping, dryer vent cleaning, and structural chimney repair, and we work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield on every job that calls for them. Call (844) 405-8628 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Nashville market as of 2026. Nashville Chimney Cleaning offers free estimates – call (844) 405-8628.
What Our Customers Say
"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
- Nathan Anderson"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Yolanda Salazar"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Sarah Vaughn