Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Nashville?
Chimney repair in Nashville typically costs between $250 and $1,200 for most jobs, with a straightforward crown or cap repair at the low end and partial flue reconstruction at the high end. A full flue reline usually runs $2,800 to $7,500 depending on liner material and chimney height. The written estimate is what sets your final price, and we provide that estimate free before any work begins.
What you pay depends far more on what’s wrong inside the flue than on the chimney’s outside appearance. A cracked crown (the concrete cap at the top) is a modest repair. Water damage that has worked through brick and mortar for several seasons is a structural job. We repair structural issues in-house on the same visit rather than handing your chimney to a second crew, which keeps the diagnosis and the fix under one roof. Our technicians have up to 9 years of experience reading exactly that difference.
Key Takeaways
- Most Nashville chimney repairs land between $250 and $1,200.
- Full flue relining with a DuraFlex flexible liner runs $2,800 to $7,500.
- HeatShield ceramic resurfacing often restores flue integrity for less than a full reline.
- Crown, cap, and flashing repairs are the most common fixes after a storm season.
- Free written estimates: call (844) 405-8628. We answer 24/7. Fast dispatch, 7am-7pm.
Chimney Repair Cost Breakdown (2026)
Here’s how the numbers usually break down for Nashville homes in 2026. These are typical estimated ranges, not quotes. Your written estimate is the real number, because a chimney the size of a coffee can looks nothing like one on a 1920s brick four-square.
| Repair Type | Typical Estimated Range | What It Covers |
|---|---|---|
| Crown repair or rebuild | $300 – $1,100 | Sealing hairline cracks or pouring a new crown |
| Chimney cap replacement | $250 – $650 | New cap and screen to block water and animals |
| Flashing repair | $300 – $800 | Resealing the roof-to-chimney joint, a common leak source |
| Tuckpointing (mortar repair) | $400 – $1,500 | Grinding out and repacking deteriorated mortar joints |
| HeatShield ceramic resurfacing | $1,200 – $2,800 | Restoring a cracked or spalling flue without full reline |
| Partial flue reline | $2,000 – $4,000 | Relining a section of flue with a DuraFlex liner |
| Full flue reline | $2,800 – $7,500 | Complete flexible liner install from top to firebox |
| Firebox rebuild | $1,500 – $4,500 | Rebuilding deteriorated firebrick and mortar |
What pushes a job up: chimney height, a liner that has to be custom-sized, water damage that reaches the brick, and a firebox that needs firebrick work. What pulls it down: catching a small crack before it spreads, and repairs that don’t require tearing into the flue. A crown crack sealed this season is a few hundred dollars. Left alone through a couple of Nashville freeze-thaw cycles, water gets behind the brick and the same crack becomes a masonry job.
The HeatShield option matters here. It’s a ceramic resurfacing system used by top-tier chimney professionals to restore flue integrity from the inside, and it saves you the cost of a full liner when the flue is cracked but still structurally sound. Competitors rarely present it because they don’t carry it. We do, and we’ll tell you honestly when it’s the right call and when a DuraFlex reline is the only safe option.
What Affects Chimney Repair Pricing in Nashville
Two chimneys with the same crack can price differently. These are the factors that move the number.
- Chimney height and roof pitch. A taller chimney and a steeper roof mean more setup and more time working safely at height. A chimney on a low-slope roof is a faster, cheaper job than one on a steep pitch.
- Type of fuel and what’s inside the flue. A wood-burning fireplace with heavy creosote load, a wood stove, and a gas insert each present different repair and lining needs. Gas appliances vent differently and often need a correctly sized liner, not just a patch.
- Water intrusion and masonry damage. Nashville’s wet winters and humid summers are hard on brick and mortar. Water that has been getting in for a few seasons shows up as spalling brick or crumbling mortar, and that’s a bigger repair than a dry, sound chimney with one cracked crown.
- Age and construction of the home. Older brick chimneys around East Nashville and the older neighborhoods often need tuckpointing and firebox work that a newer home won’t. The flue tile in an older chimney may be cracked in ways that don’t show until we’re inside it.
- Liner condition. If the clay tile liner is intact, a repair is often enough. If it’s cracked, spalling, or wrongly sized for the appliance, HeatShield resurfacing or a DuraFlex reline is the fix, and that’s where cost climbs.
- Access and interior finish. A chimney that runs up an interior wall through finished rooms is harder to work on than one on an exterior chase. Access affects time, and time is part of the estimate.
What Does Chimney Repair Actually Fix?
A lot of the work we do is water-related. Rain gets past a failing crown, a loose cap, or bad flashing, and over a few seasons that water gets into the mortar and the brick. The repair restores the barrier and stops the damage from spreading. A chimney that leaks doesn’t just look bad; the water breaks down the brick from the inside.
The other big category is flue integrity. Cracks in the flue liner let heat and combustion gases escape into the structure of the chimney, which is a fire risk, and they let carbon monoxide move where it shouldn’t. That’s why we treat a cracked flue as a repair that gets done, not a note on an inspection report. Carbon monoxide prevention is the reason a lot of structural chimney work matters.
We repair, not just sweep. That distinction is the core of what we do, and it’s why the diagnosis and the fix happen in-house. Our full-service chimney specialist approach covers three service lines: chimney sweeping, dryer vent cleaning, and structural chimney repair. If the sweep turns up a problem, we can address the structural repair on the same visit instead of sending you to a different contractor.
For homes that also have a gas dryer, dryer vent cleaning is a separate fire-safety service we handle under the same roof. Lint buildup in a dryer vent is a leading cause of residential house fires, and Famco venting expertise directly informs how we clean, assess, and reroute those systems. Same specialists, same visit.
Repair, Resurface, or Reline: Which Do You Need?
This is the question that decides your bill, so here’s how we sort it. If the flue tile is cracked or spalling but structurally sound, HeatShield ceramic resurfacing can restore it from the inside for a fraction of a full reline. If the liner is deteriorated, missing, or the wrong size for the appliance, a DuraFlex flexible liner is the right fix. If the masonry shell itself is compromised, the repair is structural, and that’s tuckpointing, crown work, or a firebox rebuild.
The short version: resurfacing when the flue can be saved, relining when it can’t. We carry DuraFlex systems for full installs and replacements, and we apply HeatShield when it’s the right material for the condition we find. If you want the full picture of what a visit involves, our Nashville chimney cleaning page covers the sweep and assessment side.
How to Save on Chimney Repair
- Catch it early. A $300 crown crack becomes a masonry repair if you wait. The cheapest repair is the one done before the damage spreads.
- Ask about HeatShield before you accept a reline quote. If a contractor jumps straight to a full liner number, ask whether ceramic resurfacing would work for your flue. If the flue is still sound, resurfacing can save real money.
- Get the cap right. A properly fitted cap keeps out rain, animals, and debris, and it protects the repairs you’ve paid for. We stock and install caps and covers from Gelco, Olympia Chimney, Famco, and Copperfield, so the hardware fits your chimney rather than the other way around.
- Fix flashing and crown together. If both are failing, doing them in one visit saves the setup and access cost of two trips.
- Book a sweep before the heating season. A routine sweep catches liner cracks while they’re still cheap to fix. Fall is the busy season, so scheduling ahead helps.
Estimates are free. Call (844) 405-8628 and we’ll look at the chimney and tell you what, if anything, needs doing, and what it will cost in writing. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What Happens When You Call
We ask a few questions about the chimney, the appliance, and any leak or draft you’ve noticed. Then we send a technician for an on-site assessment. That’s where we find out whether the problem is a crown, a cap, flashing, the liner, or something older and more involved. You get a written estimate before any work starts. The price is set per job by that estimate, and there’s no service-call fee to get the number.
Because our structural repair is in-house, we’re equipped to diagnose and fix most issues on the same visit rather than schedule a follow-up with another company. That’s a real difference when water is getting in and every week matters. For the broader picture of chimney and venting care for your home in Nashville, our team covers sweeps, dryer vent cleaning, and repair together.
Safety First: Why Structural Chimney Work Is Not a DIY Job
Chimney work puts you on a roof, at height, working around a flue that carries combustion gases. A cracked or blocked flue can let carbon monoxide into the home, and carbon monoxide is invisible and odorless. That’s why flue inspection and repair belong to a trained professional, not a homeowner with a ladder and a tube of sealant. We don’t give you a step-by-step to do it yourself; we tell you what to watch for and handle the repair itself.
Signs to call on: a leak or water stain around the chimney, spalling or flaking brick, a cap that’s loose or missing, a fireplace that smokes or drafts poorly, or a sweep that flagged a cracked liner. Any of those is a reason to get an assessment, and the sooner the better for both safety and cost.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Nashville?
Most chimney repairs in Nashville cost between $250 and $1,200, with crown, cap, and flashing repairs at the low end and tuckpointing or firebox work toward the top. A full flue reline runs $2,800 to $7,500. Call (844) 405-8628 for a free written estimate, since the exact price depends on what we find inside the flue.
Is it cheaper to repair or replace a chimney liner?
Repair is almost always cheaper when the flue can be saved. HeatShield ceramic resurfacing typically runs $1,200 to $2,800, against $2,800 to $7,500 for a full DuraFlex reline. If the liner is cracked or spalling but still structurally sound, resurfacing is the lower-cost path. Call (844) 405-8628 and we’ll tell you which one your flue actually needs.
How much does a chimney crown repair cost in Nashville?
A chimney crown repair or rebuild typically costs $300 to $1,100 in Nashville. Sealing hairline cracks sits near the low end; pouring a new crown runs higher. It’s the most common water-entry repair we do, and fixing it early keeps water out of the brick. Call (844) 405-8628 for a free estimate.
Can you come out today?
Same-day service is often available. We answer 24/7 and dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (844) 405-8628 and we’ll find the soonest slot for an assessment.
Do you charge for an estimate?
No. The estimate is free, and the price is set per job by the written estimate before work starts. There’s no service-call fee to get a number. Call (844) 405-8628 and we’ll look at the chimney and give you the range in writing.
Why does my chimney leak after rain?
Most chimney leaks trace to a failing crown, loose flashing, or a missing or damaged cap, and each is a repair in the $250 to $1,100 range depending on what’s involved. Water entry left alone breaks down brick and mortar over time, so it’s worth a look before the next wet season. Call (844) 405-8628 for a free assessment.
What brands and materials do you use for chimney repair?
We work with six professional-grade brands: DuraFlex for flexible liner systems, HeatShield for ceramic resurfacing, and Gelco, Olympia Chimney, Famco, and Copperfield for caps, covers, and venting hardware. These are the same brands specified by CSIA-certified professionals across the industry. Call (844) 405-8628 to talk through your chimney’s condition.
Chimney repair is one of those jobs where the number you hear first is only as good as the inspection behind it. We put the findings and the price in writing, use materials we stand behind, and do the structural work ourselves. Our technicians have up to 9 years of experience, and we treat carbon monoxide prevention and fire safety as the reason the work matters.
Call (844) 405-8628 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Nashville market as of 2026. Nashville Chimney Cleaning offers free estimates – call (844) 405-8628.
Written by the team at Nashville Chimney Cleaning.
What Our Customers Say
"Cap keeps the birds out now, which after two springs of scratching noises is worth every penny."
- Karen Yang"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Rosa Morales"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Shannon Fletcher